Friends don’t let friends code without tests
Posted on January 8, 2009, under Coding.
But what if your friends don’t write tests? Or what if you’re just lazy? Well, if the latter applies, that’s your own damn fault. But if nobody around you tests their code, you’re probably not going to be motivated to test your own code. But, fear not! RSpec is here!
RSpec is a really awesome testing framework. By “awesome”, I mean that it:
- makes it easy to write tests;
- makes your tests easy to read;
- gives you an easy development path to follow.
It accomplishes this by following behaviour-driven development (BDD). If you’re not a keener, don’t bother following that link. Just read on for the stegosaurus.
With BDD, you write specs that describe your application’s behaviour in terms of what it should and shouldn’t do.
Let’s write an app to mimic one of my favourite dinosaurs. And while we’re at it, we’ll do some testing. But first, install RSpec:
sudo gem install rspec
Stegosauruses are known for 2 things. Let’s start with those awesome tail spikes:
class Stegosaurus attr_accessor :tail_spikesend
That’s pretty simple. So how do we spec this? We start off by describing what we want our application to do. In this case, we should be able to grab the “tail_spikes” attribute:
require 'stegosaurus' describe Stegosaurus doit 'should have tail spikes' do steggie = Stegosaurus.new steggie.should respond_to :tail_spikes steggie.should respond_to :tail_spikes=endend
Run the spec, and we’re off to the races!
$ spec stegosaurus_spec.rb. Finished in 0.015328 seconds 1 example, 0 failures
We should also spec setting the number of tail spikes, so let’s update the spec:
require 'stegosaurus' describe Stegosaurus doit 'should have tail spikes' do steggie = Stegosaurus.new steggie.should respond_to :tail_spikes steggie.should respond_to :tail_spikes= steggie.tail_spikes = 4 steggie.tail_spikes.should equal 4endend
That’s one of the most readable and easy-to-understand tests you’ve ever seen, eh?
Stegosauruses are also known for the huge plates on their backs:
class Stegosaurusattr_accessor :tail_spikesattr_accessor :platesend
The spec should be pretty obvious:
require 'stegosaurus' describe Stegosaurus doit 'should have tail spikes' do steggie = Stegosaurus.new steggie.should respond_to :tail_spikes steggie.should respond_to :tail_spikes= steggie.tail_spikes = 4 steggie.tail_spikes.should equal 4end it 'should have plates' do steggie = Stegosaurus.new steggie.should respond_to :plates steggie.should respond_to :plates= steggie.plates = 12 steggie.plates.should equal 12endend
Notice, though, that we’re beginning to repeat ourselves. In both of those examples (#it blocks), we create a new Stegosaurus. Let’s tidy that up a bit:
require 'stegosaurus' describe Stegosaurus dobefore :each do @steggie = Stegosaurus.newend it 'should have tail spikes' do @steggie.should respond_to :tail_spikes @steggie.should respond_to :tail_spikes= @steggie.tail_spikes = 4 @steggie.tail_spikes.should equal 4end it 'should have plates' do @steggie.should respond_to :plates @steggie.should respond_to :plates= @steggie.plates = 12 @steggie.plates.should equal 12endend
What we did there is tell RSpec to create a new Stegosaurus before each example is run. To make the stegosaurus available to the examples, it simply needs to be an instance variable.
When running your specs, there are a few different ways to format the output. I tend to use the default and “specdoc” formats. Currently, our spec’s output looks like this:
$ spec stegosaurus_spec.rb.. Finished in 0.01591 seconds 2 examples, 0 failures
But we can also tell RSpec to spit out a summary of our specs:
$ spec stegosaurus_spec.rb --format specdoc Stegosaurus- should have tail spikes- should have plates Finished in 0.057443 seconds 2 examples, 0 failures
Our Stegosaurus class is feeling a bit weird, though..technically, we can set the “tail_spikes” and “plates” attributes to any object:
$ irb>> require 'stegosaurus'=> true>>?> steggie = Stegosaurus.new=> #<Stegosaurus:0x602afc>>>?> steggie.tail_spikes = "we don't want to be able to do this!"=> "we don't want to be able to do this!"
So we need to restrict those two attributes to integers:
class Stegosaurusattr_reader :tail_spikesattr_reader :plates def tail_spikes=(number_of_tail_spikes) raise ArgumentError, 'The first argument (number_of_tail_spikes) must be a Fixnum.' unless number_of_tail_spikes.is_a? Fixnum @tail_spikes = number_of_tail_spikesend def plates=(number_of_plates) raise ArgumentError, 'The first argument (number_of_plates) must be a Fixnum.' unless number_of_plates.is_a? Fixnum @plates = number_of_platesendend
With that done, what do we need to change in our specs? We need to spec the behaviour of the 2 new setter methods:
require 'stegosaurus' describe Stegosaurus dobefore :each do @steggie = Stegosaurus.newend describe '"tail_spikes" attribute' do it 'can only be set to an integer' do Proc.new { @steggie.tail_spikes = 'asdf' }.should raise_error ArgumentError, 'The first argument (number_of_tail_spikes) must be a Fixnum.' @steggie.tail_spikes = 4 @steggie.tail_spikes.should equal 4 endend describe '"plates" attribute' do it 'can only be set to an integer' do Proc.new { @steggie.plates = 'asdf' }.should raise_error ArgumentError, 'The first argument (number_of_plates) must be a Fixnum.' @steggie.plates = 12 @steggie.plates.should equal 12 endendend
Most of that is pretty self-explanatory. However, notice that we’ve just nested #describe inside of the original #describe…twice! We do this because it makes are specs read more fluidly, and it groups examples (#it blocks) together. And inside these inner-#describes, we can do anything we talked about earlier, like setup a before-block.
Let’s add one more attribute…a name:
class Stegosaurusattr_reader :tail_spikes, :plates, :name def tail_spikes=(number_of_tail_spikes) raise ArgumentError, 'The first argument (number_of_tail_spikes) must be a Fixnum.' unless number_of_tail_spikes.is_a? Fixnum @tail_spikes = number_of_tail_spikesend def plates=(number_of_plates) raise ArgumentError, 'The first argument (number_of_plates) must be a Fixnum.' unless number_of_plates.is_a? Fixnum @plates = number_of_platesend def name=(name) raise ArgumentError, 'The first argument (name) must be a String.' unless name.is_a? String @name = nameendend
And now the specs look like:
require 'stegosaurus' describe Stegosaurus dobefore :each do @steggie = Stegosaurus.newend describe '"tail_spikes" attribute' do it 'can only be set to an integer' do Proc.new { @steggie.tail_spikes = 'asdf' }.should raise_error ArgumentError, 'The first argument (number_of_tail_spikes) must be a Fixnum.' @steggie.tail_spikes = 4 @steggie.tail_spikes.should equal 4 endend describe '"plates" attribute' do it 'can only be set to an integer' do Proc.new { @steggie.plates = 'asdf' }.should raise_error ArgumentError, 'The first argument (number_of_plates) must be a Fixnum.' @steggie.plates = 12 @steggie.plates.should equal 12 endend describe '"name" attribute' do it 'can only be set to a string' do Proc.new { @steggie.name = ['not valid'] }.should raise_error ArgumentError, 'The first argument (name) must be a String.' @steggie.name = 'Rupert' @steggie.name.should equal 'Rupert' endendend
Let’s run that spec now:
$ spec stegosaurus_spec.rb..F 1)'Stegosaurus "name" attribute can only be set to a string' FAILEDexpected "Rupert", got "Rupert" (using .equal?)./stegosaurus_spec.rb:37: Finished in 0.02225 seconds 3 examples, 1 failure
Hrmmm, that’s no good. But that’s a fairly useful error message, eh?…well, sort of. It’s telling us what it expected, and what it received. The thing is, it expected “Rupert” and got “Rupert”, so what’s going on? The problem lies in the fact that you can’t use #equal? to compare strings, and that’s exactly what we’re doing. If you don’t believe me, try it for yourself:
$ irb>> 'Rupert'.equal? 'Rupert'=> false
BTW, did you notice the “(using .equal?)” hint that RSpec gave us?
Enough banter. All we need to do is change this:
@steggie.name.should equal 'Rupert'
to this:
@steggie.name.should == 'Rupert'
Shall we view our specs in all their glory now?
$ spec stegosaurus_spec.rb --format specdoc Stegosaurus "tail_spikes" attribute- can only be set to an integer Stegosaurus "plates" attribute- can only be set to an integer Stegosaurus "name" attribute- can only be set to a string Finished in 0.018755 seconds 3 examples, 0 failures
Those’re the absolute basics of RSpec. If you’re thirsty for more, check out the RSpec website.
Testing…it’s what life’s all about
I just read a great call to action by John Nunemaker. He wants to see everyone writing tests for their code, and has decided to “post like a superhuman fiend until everyone is testing”. He’s on to something!
With that said, I’m joining in. I primarily use RSpec, so I’ll be focussing on that, but we’ll give Cucumber and other tools a go, and we’ll be starting with the basics.
So subscribe to our feeds, and stay tuned!
ModelSpeccer Released!
Yesterday I released my first open-source project. It’s called ModelSpeccer, and it generates RSpec specs on-the-fly for Rails model attributes. It started out as part of my housing rentals website, and eventually grew into a separate module. Once that happened, I figured I might as well learn how to write a Rails plugin, and published it on GitHub. Have a look:
http://github.com/nickhoffman/modelspeccer/